Today we took our 2wd Traxxas Slash for its first real
winter run through, ice and compacted snow.
We already learned that I basically will not run worth crap in two
inches of new snow. It just can’t get
enough traction. The truck ran ok for
2WD if you eased slowly into the throttle, but if you hit the power the tires
break loose and the truck spins around.
Doing doughnuts in this fashion is fun for a while, but after a couple
of minutes I want the truck to go fast.
Eventually we took it to a well plowed parking lot to get some
speed.
Overall the family had a good time running the Traxxas Slash on both the snow, ice and dry pavement.
Wet leaves are the enemy of traction to cars big and
rc. The surface of leaves of slippery
which makes them to lose traction with tire, but also the surface they rest
on. The result is out of control
driving. Yesterday I experienced both
the crazy slickness of the leaves with my Honda SUV and Traxxas Slash 2WD. The Traxxas has no stability control, but my
Honda does. Even the Honda had a hard
time keeping traction, but I was always in control. The wet leaves allowed me to do some burnouts
and doughnuts, which aren’t hard to do with the slash 2WD with any amount low
traction surfaces, but it was still fun kicking up the leaves. I had to get some time in with my remote
control truck before the snow starts flying.
I have a feeling the 2WD is going to be useless in the snow.
All of this wheel spinning fun is taking its toll on the
rubber, time for a tire rotation.
Today we mounted a SJCAM SJ4000 Action Camera on our old
friend the Traxxas Slash 2WD for the first time to get something of a FPV (first person view) feeling. I have a couple of GoPro Hero 3 Black
cameras, but those are much more expensive and I didn't want to bash the rc
into anything and especially not roll it over.
The camera was simply clipped on to the large plastic plate that GoPro
cameras are attached to in their packaging.
That plate was then attached to the Lexan body of the slash with duct
tape, which is visible in the rearward-facing shots. The simple attachment method worked well even
through water. I attempted to not roll
the truck over during this test, but I still did about four times. The camera and its waterproof case both came
out fine. The camera did come loose of
its clip mount and go flying when I hit a stationary object. I’ll have to come up with a tether so it
won’t leave the car and get lost in the grass.
I was pleased with the results and they were pretty much
like I expected. I’ve seen plenty of
videos with cameras mounted on short course, monster trucks and other
rc’s. I ran my setup down a couple of
wide walking trails, which gave it a somewhat scale racetrack feel. I also blasted the completely stock Traxxas
Slash 2-WD through puddles, leaves grass, down a large black pipe and across
parking lots. All of this was done on one 7-cell NiMH battery which got pretty
tired by the time I was driving through the water. Speaking of water I drove the poor vehicle
into a pond, it didn’t turn, lost traction and got sand in the motor. The motor was jammed, but I got it fixed and
was able to shoot the rest of the video.
I have a lot more experimenting to do with this set up. In the future I plan on trying some different
mounting methods to get different perspectives on both the external and
internal parts of the rc car. It should be interesting, and I’ll share the
results with you hear and on YouTube. I
hope you enjoy the video.
A remote control car flips in the air after taking a turn too sharply.
No damage done in this crash
We took our truck out yesterday to a parking lot which had a thin layer of dirt. It was prime conditions for the tires to throw dirt in the air and do some doughnuts. It was a lot of fun, but could be hard on the motor. I think we'll take it easy next time, well, maybe...
Traxxas Slash 2wd kicking up dirt after a standing start.
